Wednesday, October 31, 2012

The Haunted Acres

The Haunted Acres (located at 207 Mindish Road Sidman, PA  15955) is a 20 minute walk through the chilling woods that will take you through many different themes and Scares.  There will be strobe lights, artificial fog, black lighting, and creatures that will make you jump and scream!  You will not be touched on the trail, and we ask you do not touch the creatures or props.  The trail is not recommended for children under the age of 7 (Except on our Kids Night show event date).

Our "Kids Night" show scheduled for Nov. 3rd from 4pm until 6pm is for those who want a little less fear and a little more fun.  For the adults who want to experience both...come back on the 3rd from 7 to 10:30pm and get in free.

Currently, all events scheduled for this week have been cancelled. Right now, the Kids Night is still on for Saturday. For more information please visit http://www.thehauntedacres.com or call 814.619.8903

Wednesday, October 24, 2012

Tire Buying Tips

Understand Tire Basics

Simply put, a tire is a flexible container of compressed air. This air container support the vehicle's load; propels a vehicle forward, backward and side-to-side; stops the vehicle; and cushions the load from road imperfections.

Today's tires have between 19 and 25 different components. Tires are built from the inside out rather than the outside in. The heart of every tire is an inner liner. Its job is to give the tire shape and hold in air. Fabric belts are wrapped around the inner liner. The bead is fastened to the bottom of the fabric belts and holds the tire to the wheel.

On top of the fabric belts are steel belts. These belts have two jobs: They give the tire stability and make the tread pattern as flat as possible. (A flatter tread means more contact with the road.) The tire tread is on top of the belts. There are different tread patterns for different types of tires. The sidewall on the side of the tire gives it stiffness and ride characteristics. A taller, softer sidewall will absorb more bumps, while a shorter, stiffer sidewall will provide better cornering ability and sharper steering response.

On the sidewall of every passenger-car and light-truck tire is an alphanumeric code that describes the dimensions of the tire. For most tires, this code will start with a "P." Some may start with an "LT" to signify light truck. Some tires may have a "Max. Load" indication. When selecting new tires, it is important to make sure a tire's load rating is at least a high as the tire you are replacing.

Choose the Right Tire

Perhaps the biggest mistake a consumer can make whenreplacing tires is not using the correct size. On the sidewall of your tire, you'll find a code that tells the tire's size and capabilities. Here's a sample code:

P195/60R16 63H M+S
  • P - Type of tire
  • 195 - Width of the tire across the tread in millimeters
  • 60 - Aspect ratio of the sidewall compared to the width
  • R - Radial construction
  • 16 - Diameter of the rim in inches
  • 63 - Tire's load rating
  • H - Tire's speed rating
  • M+S - Tire is suitable for all-season driving

If the tire-size code starts with LT instead of P, it means the tire is a light-truck tire. Light-truck tires are designed to have higher-load carrying capacities and are usually found on pickups and SUVs. These vehicles are not required to have LT tires, and in many cases, the original-equipment specification calls for passenger-car tires.

The speed rating translates into the tire's ability to dissipate heat, or prevent heat build-up. Heat is a tire's enemy. The more heat, the faster the tire wears, and the faster a tire might break down. A tire with a higher speed rating can dissipate more heat on long highway trips. If a consumer were to spend little time on the highway, the speed rating might not be an important factor in choosing a replacement tire.

Tires are speed rated from 99 to 186 miles per hour (159.3 to 299.3 kilometers per hour). The most common speed ratings are T (118 miles per hour or 189.9 kilometers per hour) and H (130 miles per hour or 209.2 kilometers per hour). Both of those ratings clearly exceed the nationally posted speed limits and would make excellent long-distance highway tires. If a consumer were to drive only in urban situations at low speeds, a tire with an S (112 miles per hour or 180.2 kilometers per hour) speed rating might be completely acceptable.

Another important factor in choosing a replacement tire is the load rating. The load capacity number on the tire-size code indicates the load-carrying capacity of that single tire. When selecting replacement tires, consumers have to be careful not to select a tire with a lower load-carrying capacity.

Regardless of a tire's speed rating, load-carrying ability, size and construction, traction are the keys to safety. A common mistake is to select a tire without considering its ability to hold the road. Savvy consumers will balance a tire's traction in dry conditions, in wet conditions and in the snow. If you desire a high-performance tire but live in northern climates, consider a "winter" tire for driving in the snowy season. If you live where the weather is warm all year, a touring tire may suit your needs just fine.

Most consumers will make the mistake of waiting until spring to get new tires. As a tire wears out, dry traction generally increases and wet and snow traction decrease. So the best time to buy new tires is not in the spring, but in the fall.

Passenger-car and light-truck tires are very different. Pickup and SUV owners will generally select passenger-car tires because they are less costly and offer a smoother ride. However, if a vehicle will consistently be loaded with cargo or will be asked to pull a heavy trailer, then perhaps the higher load-carrying capacity of a light-truck tire would be the better choice.

 

Consider How You Drive

Regardless of where you get new tires, there are a few things you should keep in mind:

  • Know the size and type of tire recommended by your owner's manual.
  • Determine your needs and priorities. What type of driving you will be doing? Do you prefer a soft ride, a firm ride, or a mix of the two?
  • Make sure you purchase a tire that is capable of supporting the load your vehicle might demand. Don't buy a passenger-car tire if you need a light-truck tire.
  • Don't buy more tire than you need. Consumers often overestimate their tire needs. In most cases, a quality all-season tire will suffice where a touring tire might be suggested.
  • Keep in mind that any tire selection is a balance between ride quality, noise suppression, fuel economy, wear, load capability and cost. It's the job of the tire-store expert and the consumer to select a tire that is the right balance of each.
  • An interesting trend in the automotive aftermarket industry is "plus sizing." It involves mounting bigger wheels and tires on a vehicle to enhance the look or improve handling.

Plus sizing usually increases cornering response and traction. Often these gains come at the expense of increased ride harshness. In addition, these larger wheels and tires are often not as durable as OEM wheels and tires.

A few items of note for consumers considering plus sizing:

  • Make sure that the tire and wheel are approved for use on your vehicle.
  • Make sure that the replacement tire has the same load-carrying capacity.
  • The new wheel and tire combination should be within 3 percent +/- the original tire diameter.
  • Make sure that a new tire placard is installed to inform future owners of the correct tire pressure.

New vs. Used Tires

You've probably seen used car tire piles along the side of the road at some point. But should you purchase a used tire to save money and will it hold up as long? Most people opt for new tires, but some look to used tires as a way to save money.

Consider the fact that some retailers have deals where you buy three tires and you get the fourth free. You may not necessarily need to replace that fourth tire, but you do because it's free. Used tires that are only slightly worn, like in this situation, may be a good option to save a little money.

The flip side is purchasing an old or worn out tire that isn't safe. Used tires may have defects, punctures or tread-wear you may or may not be able to see. When considering purchasing a used tire you can test the depth of the tread by using a penny. Simply flip the penny upside down and place it inside each of the tire's tread grooves. If the top of Lincoln's head can be seen from any of the grooves then the tread is too low [source: Consumer Reports].

If the tread is still good, you still need to inspect the tire for any defects. This may be difficult and some problems may not be noticeable until the tire is on the vehicle. Purchasing a used tire that has already been plugged or patched may save money, but is not a good idea. Worn tires will not stop as fast and will be more likely to skid on wet surfaces [source: Consumer Reports].

New tires will come with some type of guarantee or warranty that a used tire will not have. If you want a little piece of mind that your tires are in the best condition possible, buy new ones.

Read more tire buying tips: http://auto.howstuffworks.com/buying-selling/cg-tire-buying-tips.htm

Wednesday, October 17, 2012

How to Share the Road with Truckers

Everybody has a horror story to tell about an encounter they've had with an 18-wheeler on the Interstate, and how they were nearly killed by the inattentiveness of the truck driver. News programs like Dateline NBC and 60 Minutes feed this fear with selectively edited stories regarding truck safety. But what nobody seems to consider is that they themselves may have caused the problem because of ignorance about what is involved in driving a truck, or by engaging in righteous driving behavior that did nothing but endanger their own lives and those of the people they care most about.

Personally, we've seen rude truckers hog the road, and we've seen dimwitted drivers set themselves up for what could be a very painful, if not deadly, lesson. Furthermore, not all trucks traveling the nation's highways are properly maintained, due to a lack of finances or pure laziness. But for most truck drivers, who are paid by the mile and are held responsible for damaged goods, their lives and livelihoods depend on driving a well-maintained truck carefully, and getting freight to its destination on time.

Tractor trailer trucks are responsible for carrying nearly 30 percent of all the cargo shipped in the United States. Technology and improved roadways have allowed the use of trucks for shipping to increase steadily since the 1920s, resulting in larger vehicles and heavier loads. Yet, traffic fatalities involving trucks have steadily declined during the past 50 years, except for a small spike upward in the early 1980s right after the trucking industry was deregulated. Fatalities due to accidents involving semi trucks total 5,000 annually on average, with the vast majority of those fatalities suffered by occupants of passenger vehicles that collided with a truck. As motorists who must share the road with semi trucks, we can do our part to help reduce this number even further if we simply take the time to follow a few simple driving rules and try to understand how difficult it is to maneuver a tractor-trailer in traffic.

We asked Michael Taylor, transportation special programs developer for the Tractor Trailer Training Program at Triton College in River Grove, Ill., what the top five pet peeves truckers had with fellow motorists were. Here is his list:

1) Riding in a trucker's blind spots. Trucks have large blind spots to the right and rear of the vehicle. Smaller blind spots exist on the right front corner and mid-left side of the truck. The worst thing a driver can do is chug along in the trucker's blind spot, where he cannot be seen. If you're going to pass a truck, do it and get it over with. Don't sit alongside with the cruise control set 1 mph faster than the truck is traveling.

2) Cut-offs. Don't try to sneak into a small gap in traffic ahead of a truck. Don't get in front of a truck and then brake to make a turn. Trucks take as much as three times the distance to stop as the average passenger car, and you're only risking your own life by cutting a truck off and then slowing down in front of it.

3) Impatience while reversing. Motorists need to understand that it takes time and concentration to back a 48-foot trailer up without hitting anything. Sometimes a truck driver needs to make several attempts to reverse into tight quarters. Keep your cool and let the trucker do her job.

4) Don't play policeman. Don't try to make a truck driver conform to a bureaucrat's idea of what is right and wrong on the highway. As an example, Taylor cited the way truck drivers handle hilly terrain on the highway. A fully loaded truck slows way down going up a hill. On the way down the other side of the hill, a fully loaded truck gathers speed quickly. Truckers like to use that speed to help the truck up the next hill. Do not sit in the passing lane going the speed limit. Let the truck driver pass, and let the Highway Patrol worry about citing the trucker for breaking the law.

5) No assistance in lane changes or merges. It's not easy to get a 22-foot tractor and 48-foot trailer into traffic easily. If a trucker has his turn signal blinking, leave room for the truck to merge or change lanes. Indicate your willingness to allow the truck in by flashing your lights.

According to "Sharing the Road," a booklet distributed by John Deere Transportation Insurance, the three most common types of accidents involving heavy trucks involve the following:

1) Crashes caused by the truck's inability to stop in time.2) Crashes caused by a motorist trying to pass a truck on the right while the truck is making a right-hand turn. Also known as the right turn squeeze.3) Crashes caused by a motorist riding in the trucker's blind spots. Use the following rule of thumb: If you cannot see the truck driver in his mirrors, he probably cannot see you.

By taking simple common-sense steps to protect yourself and your family when driving near large trucks, traffic fatalities will continue to drop. Over the years, the trucking industry has improved the quality of truck drivers by making it more difficult to qualify for and keep a Commercial Driver's License (CDL). Mandatory drug testing has also been instituted. In fact, the National Highway Traffic Safety Administration (NHTSA) published the following data in 2008. The intoxication rate for drivers involved in fatal accidents was:

27% for motorcycle riders 23% for light truck drivers (pickups and SUVs, that is) 23% for passenger car drivers 1% for truck drivers

Still, more work must be done to combat tightly scheduled deliveries, overbearing stacks of paperwork and driver fatigue caused by federal regulations that work against the human body's natural circadian rhythm.

After meeting with truck driving instructors at Triton College, with representatives from the Illinois Transportation Association and learning what it takes to pilot a tractor-trailer by taking the wheel myself, we joined Taylor for a ride in a brand-new empty tanker truck.

We covered suburban roads during a half-hour loop just to the southeastern side of O'Hare airport. During our 30-minute ride, two motorists turned left across traffic directly in front of the truck. One young woman in a Toyota Celica crossed no more than 50 feet in front of us as she zoomed onto a side street. An older couple in a Dodge Grand Caravan turned in front of our International tractor, and incredibly, slowed so they wouldn't scrape the van on a steep driveway apron to a convenience store. A dude in a Camaro RS blasted by on the left, cut in front of the truck and stopped at a red light we were approaching. When the light turned green, he turned right.

These are the kinds of driving habits that we must break for truck-related accident rates to drop even lower. After a day at truck driving school, we left Chicago for Denver in a Subaru Outback. During that evening and the next day traveling I-80 and I-76, we were keenly aware of the needs of the truckers with whom we shared the road. We behaved more courteously toward truck drivers and fellow motorists than usual, and exercised more patience. We doubt very much that by driving more defensively and less aggressively we arrived in Denver any sooner than we would have had we not let that Kenworth into our lane back in Iowa or had we tried to beat that Freightliner to the construction zone near Lincoln, Neb. We do feel, however, that our trip was a safer one, that we had done our part to make highway travel better. Now it's time to do yours.

Source: Edmunds.com

Thursday, October 11, 2012

Sandyvale Pumpkin Sale This Weekend!

Don’t miss the Sandyvale Pumpkin Sale at Sandyvale Memorial Gardens Trail and Dog Park on Saturday, October 13th. There will be pumpkins and corn stalks for sale at competitive prices.  Be sure to sign up for FREE giveaways!  Bring your dogs to enjoy the dog park, walk the Sandyvale Trail 1 mile loop - enjoy a beautiful Fall day with your family and friends!

For more information call 814-539-8995

Friday, October 5, 2012

Is Your Car Seat Installed Properly?

Nissan takes family safety very seriously making it a top priority. To show how serious Nissan is about safety check out the PDF guide online that suits your specific vehicle for "Snug Kids".


Snug Kids®, an industry-first program geared specifically toward safety for children in child restraint systems (CRS), commonly referred to as "child safety seats". Not all CRS fit in all vehicles. Nissan safety engineers have spent thousands of hours evaluating hundreds of CRS by installing them in all the rear seats of our current Nissan vehicles. The result is the Snug Kids® Child Safety Seat Fit Guide which helps parents confidently select a CRS that fits their vehicle while also providing valuable tips on the proper fit of a CRS.

The Snug Kids® Child Safety Seat Fit Guides for Nissan vehicles are available for download here.




Twitter Delicious Facebook Digg Stumbleupon Favorites More